If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
There is one problem (actually two) with this with 1600b. When it gives you the EHR it also is calculating in temp and pressure into the corrected distance figure.
While initially I thought this was pretty awesome. I actually don't like it at all. And you cannot turn off the function of it taking temp and pressure into account in the EHR corrected range.
If you keep the range finder in your chest pocket for example the temp reading will be quite incorrect. Apparantly it can take up to 30 minutes for the temp to stablise.
To get a technically better ballistic solution you need to be dealing with raw data. I now just use the actual line of sight range, then press the other button and get the angle. Then enter those and the temp and pressure figures into shooter app on phone. Then you know where you are and that you know that your come up will be more correct.
Of course you can test on the hill to see if you are getting the same come ups using both methods.
Sent from my SM-G900I using Tapatalk
Have you done the calcs on exactly how much the temp changes the MOA between say 15 and 30 degrees?? Bugger all in my. 284 at 500m but for temp diff of 15 v 35 degree there is a 16inch drop diff at 1000m
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks