If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
So it turns out the barrels are soldered in. I was trying to heat up the barrel shank to break the threads/press fit free and noticed the smell of solder flux and then with a bit more heat, had little balls of solder appearing in the back join. So I kept heating it up and tapping with a wooden mallet and eventually it slid off nice and easy. I had to remove the sling mount (which was also soldered) to get the barrel adapter off.
[COLOR=#222222][FONT=Verdana]Its all low temp solder, maybe very low silver solder.
Wow! So contour the chamber area of the other barrel, cut the extractor and head space.
A simple but quite clever attachment method.
I have a Baikal under over rifle, wounder if it's done the same way?
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks