If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Funny that you're doing this project.... this has been on my mind
In terms of avoiding lacing, if you don't mind making it a tight fit, check if a sewn-to-fit mocked up cartridge holder will slip over the pistol grip on the stock from the front - either entirely over the action or with the stock off. Sling swivel can be used to retain the holder from slipping forwards if it's well reinforced. Hardened/waxed leather will be less prone to relaxing and getting loose over time/repeated wetting, but do test runs first, waxed leather doesn't behave the same way as unwaxed.
After a bit of research, I think I will probably just stitch it in place using a baseball stitch. The pistol grip will stop it from sliding over from the front, but good idea, something I hadn't thought of. I will likely be using the sling swivel as an anchor.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks