Thread: BSA 243

Update- have stripped most of the metal work out- cleaned most of it up- removed rust- removed 99% of the black coating on the rings- will give it all another once over tmrw- cut the ring screws down, then scrub with jiff rinse and then degrease, and at some stage will Duracote either Matt black or Blue/black.
Will also do same to barreled action soon, and sand back the stock- oil the shite out of it and send to @Hunter_Nick to recut the nearly disappeared chequering. I was thinking of attempting that part bit its too easy to eff up- and is above my pay grade

There was urethane liberally splashed about the place, inside the magwell, all over the bottom metal, i guess in an attempt to keep water out of the inletting in the stock- which is well urethaned inside.