If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
You're correct, it is the #1 profile on the 20" lightweight. The Alpine was designed around this action and barrel profile.
The stock I got had a fair bit of excess paint on the action bedding blocks (aluminium machined and bonded into the stock). There was even more in the underside where the bottom metal fits. Once this was tidied up it fitted okay, but certainly wasn't perfect. I shot it and it went okay bolted straight to the metal bedding inserts.
I took it hunting just the once set up like this. A bit of time pushing through gorse and various other rubbish led to the rifle being very odd the next time I had it down the range trying to find out what sort of diet it liked. I pulled the stock off and a whole load of shit fell out of the area around the action - too much space for crap to wiggle in. So it got a bedding job as I knew it inevitably would and it's been great since.
Thanks alot. This is exactly what I was wanting to find out for a long time.
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks