Thread: Making a Rolling block rifle on my lathe.

Well looks like you are seeing it again but its the other side, this is the under side of the tang. Nothdude you will be happy to know I used the drill press for all the holes this time, It`s just that the action holes had to be spot on and square to the action, so use the lathe . Gremlins getting in, just about finished the milling that first bit when bang the milling bit snapped, bugger, but had a spare one so job done . Had a talk to Tub@steel as to where my two bits of 4140 was going to come, lost my order sort of stuff but it`s on the way, so may be looking at making a barrel to see if I can improve on them.
, Fly cutting it true.