257weatherby
sneakywaza I got

2783 Likes

Page 164 of 186 First ... 64114150151152153154155156157158159160161162163164165166167168169170171172173174175176177178 ... Last

• Jump to page:

1. 
   Gibo liked post by 257weatherby On thread : 6.5 saum

   So it's not a 6.5 Saum thread anymore?, again........

   Liked On: 04-08-2016, 08:36 PM

2. 
   mikee liked post by 257weatherby On thread : 6.5 saum

   Did the math to get a starting load to fireform, necked 10 cases, loaded up and down to the range 53314 80gns 50BMG to start, can get about 5gns more in the pre fired case, will get about 10...

   Liked On: 03-08-2016, 09:32 PM

3. 
   Matt2308 liked post by 257weatherby On thread : 6.5 saum

   Did the math to get a starting load to fireform, necked 10 cases, loaded up and down to the range 53314 80gns 50BMG to start, can get about 5gns more in the pre fired case, will get about 10...

   Liked On: 03-08-2016, 09:09 PM

4. 
   Matt2308 liked post by 257weatherby On thread : 6.5 saum

   I HAVE A .264 Win mag, 140 Bergers going 3300, and looks good for some more yet, but now I have a new project:) 53282 53283 Can't get cases, so gonna make them from 300Wby cases, could be a whole...

   Liked On: 02-08-2016, 11:51 PM

5. 
   mikee liked post by 257weatherby On thread : who does reloading & load development in chch

   So hit up the last owner! Amanda (Gunworks) knows someone who does load development for people, but you first have to be realistic about the fact it won't happen for $20 and a box of beers.

   Liked On: 29-07-2016, 08:45 AM

6. 
   BRADS liked post by 257weatherby On thread : who does reloading & load development in chch

   So hit up the last owner! Amanda (Gunworks) knows someone who does load development for people, but you first have to be realistic about the fact it won't happen for $20 and a box of beers.

   Liked On: 29-07-2016, 07:59 AM

7. 
   Ernie liked post by 257weatherby On thread : A swift hour at the range

   Don't worry Ernie, with practice it will get better. keep at it:D

   Liked On: 29-07-2016, 01:13 AM

8. 
   WallyR liked post by 257weatherby On thread : A swift hour at the range

   Don't worry Ernie, with practice it will get better. keep at it:D

   Liked On: 28-07-2016, 03:37 PM

9. 
   buell984 liked post by 257weatherby On thread : New Hornby Store Now Open

   Forum member discount?

   Liked On: 26-07-2016, 11:48 AM

10. 
    Tikka7mm08 liked post by 257weatherby On thread : New Hornby Store Now Open

    Forum member discount?

    Liked On: 25-07-2016, 09:20 AM

11. 
    223nut liked post by 257weatherby On thread : New Hornby Store Now Open

    Forum member discount?

    Liked On: 24-07-2016, 08:07 PM

12. 
    Ryan_Songhurst liked post by 257weatherby On thread : 270 factory loads

    Worth reminding the 7mm mob, that there is in fact, only one true 7mm, and it is called .270 Winchester!:P

    Liked On: 24-07-2016, 05:46 PM

13. 
    HNTMAD liked post by 257weatherby On thread : Who's going out this weekend

    Hey Hamish!, I know a spot were there are cattle well up into the DOC conservancy, but they are too fucking big to carry one out on my own, you want in?

    Liked On: 20-07-2016, 09:16 PM

14. 
    GWH liked post by 257weatherby On thread : Cooking systems - gas vs hexamine stove/ open fire

    When I was gas metal spraying down south in winter, I used to switch to the smaller 9kg propane bottle and dump it in a 60 ltr drum half filled with warm water so I could get enough gas flow (-5...

    Liked On: 18-07-2016, 11:28 PM

15. 
    Ryan_Songhurst liked post by 257weatherby On thread : what weights?

    W748. Job done!

    Liked On: 08-07-2016, 09:56 PM

Page 164 of 186 First ... 64114150151152153154155156157158159160161162163164165166167168169170171172173174175176177178 ... Last

• Jump to page: