Been learning how to use a lathe, enjoying it a lot. Have made some custom cleaning jags with brass, a paper cartridge former out of nylon, and other bits and pieces. So today I wanted to solve a...
Liked On: 05-01-2024, 09:15 AM
I watch a bit of NZ-based YouTube hunting and put myself in the still young (but probably too cynical) category. I am well aware that all the flash gear being used is nice-to-have rather than...
Liked On: 05-01-2024, 09:05 AM
FSA are correct, AO's are not allowed to enter peoples gun details into the register, you can only ring up the call centre and talk to someone who knows absolutly nothing about guns at all.
Liked On: 04-01-2024, 11:19 PM
https://www.lvvta.org.nz/documents/suplementary_information/LVVTA_LVV_Cert_Threshold.pdf
Liked On: 04-01-2024, 11:17 PM
Goog questions but my answers not so much. The issue that I had with answering is that I am very black or white when it comes to having confidence and I struggle to accept that there are degrees of...
Liked On: 03-01-2024, 10:30 PM
I had taken to much of the outside of the hammer so re ground the inside to get better engagement this worked well, created another issue when cooked and Safety on then pull the trigger the sear was...
Liked On: 02-01-2024, 11:35 PM
If its the forend one thats stripped out, you can buy sling swivel studs that have a backing nut on them. Drill the hole right through to the barrel channel, drill a bigger hole to fit the nut in to,...
Liked On: 02-01-2024, 11:10 PM
Just an up date I didn't let it beat me and after working through a couple of problems the trigger works as it should thanks to those who offered help
Liked On: 02-01-2024, 11:08 PM
Another good super load bullet is the 160gr TTSX. With the subs i tried 315gr soft cast. While they didn't group too well they were acceptable but poi too sideways from super load. The 300gr sierra...
Liked On: 02-01-2024, 10:56 PM
I’ve had it in my HMR, can’t remember which one, I’ve owned four of them. Projectile half way down barrel, I picked up the different noiseand checked, powder was black, still in the case. I think...
Liked On: 02-01-2024, 08:07 AM
this sort of expression best left between your ears OK a lot of us were a bloody sight closer to it than you.
Liked On: 01-01-2024, 09:51 PM
yep pays to shoot subs suppressor-less at first at cardboard to check they are not sideways. Failing to check first means your nice shiny suppressor may have a very bad day.
Liked On: 31-12-2023, 08:45 PM
A good place to start if no one on here is available is to head down to the BOP deerstalkers they have a club meeting on the second of Jan. Years of experienced hunters and advice to be found. ...
Liked On: 29-12-2023, 11:07 PM
If the verdict is a guilty and the confiscation is confirmed by the courts the evidence will either be sent to the Police armoury or destroyed once the appeals are exhausted. It can't be destroyed...
Liked On: 28-12-2023, 05:41 PM
It's not just me then Better luck next time Stug
Liked On: 27-12-2023, 10:45 AM