Definitely agree with your experience with Alpine Precision. In fact, his CS is too good [emoji1787]. 1 build has turned into 2 and now a couple more on the way/in the pipeline. He even tried...
Liked On: 08-05-2020, 09:04 PM
The SOD moa dial up turret definitely fits the VX1 leupolds as well Remove the cover http://uploads.tapatalk-cdn.com/20160524/6d24eeb49d247a59089b789929eb0505.jpg Then add the spindle...
Liked On: 08-05-2020, 08:50 PM
Greetings, I bought some of the CAC stuff in boxes like that in the late sixties, cost thirty bob ($3.00) a packet. Likely to be Berdan primed. There may be collector interest in it, perhaps a lot....
Liked On: 07-05-2020, 11:37 AM
Stainless. We dont believe in, nor would bring in Blued under ceracoat
Liked On: 07-05-2020, 11:27 AM
Not a silly suggestion, but the fore end is short and doing that would change the balance point. What I have just done is to take the PN 12 pipe off and heat slipped a 150mm long piece of PN 10 Red...
Liked On: 06-05-2020, 03:47 PM
Will throw in a low scope safety free aswell.
Liked On: 04-05-2020, 09:31 PM
I had this on a blackout. Smoke the inside front edge of the hand guard with a burning match, spin on the can with white masking tape around the bit that lines up with the smoked area. Shoot it or...
Liked On: 04-05-2020, 08:21 PM
Mitch, if he is busy, give me a shout, I have a range of imperial taps in those sizes, and some spare screws. Just had a quick look : 6-48 UNEF, 6-40 UNF, and 8-3 UNF, so should be able to get you...
Liked On: 04-05-2020, 07:14 PM
Know a bloke 40km up the road who got a visit from 15 blokes in black pyjamas for his non mag lite, maglites. I hunt with a bow too so up close isn't a problem.
Liked On: 02-05-2020, 12:38 PM
You need to consider the donor platorm you are working with. The .222 Brno fox has a shorter mag than the later CZ527 .222. The Fox had different length mags and bottom metal for all the...
Liked On: 02-05-2020, 12:35 PM
Suppressed or unsuppressed, the ballistics are still the same obviously. The point is if you can't suppress it and do subsonic loads, it's going to bark like a 308 with supers, so why not just buy...
Liked On: 02-05-2020, 10:49 AM
I just knocked this up for a mate as his rabbit control rifle. It is a .22 BSA 12/15 target rifle, barrel shortened to 20" and a Parker Hale suppressor fitted, left receiver wall cut down for...
Liked On: 01-05-2020, 12:56 PM
137640 Too much bloody time in lockdown decided to turn my 308 tikka into a long action DIY style (aka bubba as hell). Was too far gone before I realised my mistake. So 1 finishing nail latter...
Liked On: 30-04-2020, 01:08 PM
I got a bunch of gunsmith work done and mil-spec coating on multiple Contender barrels and the CZ all at once. So I couldn't tell you exactly, but I think it's around $290 from Cerakote NZ.
Liked On: 28-04-2020, 10:31 PM
How good do they track your walk? I only realy want to use the back track function cheers Sent from my SM-G960F using Tapatalk
Liked On: 28-04-2020, 09:45 AM