caberslash
Member

992 Likes

Page 7 of 67 First 12345678910111213141516171819202157 ... Last

• Jump to page:

1. 
   Eat Meater liked post by caberslash On thread : Getting back in the game. Gunsmithing needs

   Be easier and cheaper to flog the lot and buy rifles chambered in modern (post-2010) cartridges that shoot modern bullets, with factory ammo available. 300 PRC and a 6 ARC would cover both bases...

   Liked On: 13-05-2024, 12:44 PM

2. 
   tibo liked post by caberslash On thread : Random innaccuracy?

   Is this factory ammo or reloads? You'll get a POI shift if you have brass headspaced off the belt vs. shoulder. If you have conventional dies and a factory chamber, you'll land up in the middle...

   Liked On: 08-05-2024, 08:52 PM

3. 
   STC liked post by caberslash On thread : Best factory ammo I've ever seen, chur chur

   Powerhead 1 and 2 are Barnes Powerhead Blade is their own concoction

   Liked On: 06-05-2024, 10:35 PM

4. 
   Roarless20 liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

   Hi all, thought this would be of interest to those still using irons. Done some digging around and found this type of dual setting front sight, allowing the use of either a standard post for...

   Liked On: 06-05-2024, 10:04 PM

5. 
   Ross Nolan liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

   Clearer picture of the new Pedersoli 249399

   Liked On: 06-05-2024, 09:21 AM

6. 
   Gkp liked post by caberslash On thread : Dreams are free - Ideal do it all riflescope for NZ

   I'd rather pack a bit more weight and it be reliable.

   Liked On: 06-05-2024, 07:18 AM

7. 
   timattalon liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

   Hi all, thought this would be of interest to those still using irons. Done some digging around and found this type of dual setting front sight, allowing the use of either a standard post for...

   Liked On: 04-05-2024, 11:26 AM

8. 
   BushChook liked post by caberslash On thread : Magazine help needed - misfeeding

   Try and video the mis-feed via the action opening, preferably slo-mo. Not easy with a semi-auto I know! I suspect the pin is there to keep the follower aligned at a certain angle. .22LR has...

   Liked On: 04-05-2024, 10:42 AM

9. 
   Makros liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

   Hi all, thought this would be of interest to those still using irons. Done some digging around and found this type of dual setting front sight, allowing the use of either a standard post for...

   Liked On: 04-05-2024, 10:17 AM

10. 
    Marty Henry liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

    Hi all, thought this would be of interest to those still using irons. Done some digging around and found this type of dual setting front sight, allowing the use of either a standard post for...

    Liked On: 04-05-2024, 08:48 AM

11. 
    madjon_ liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

    Hi all, thought this would be of interest to those still using irons. Done some digging around and found this type of dual setting front sight, allowing the use of either a standard post for...

    Liked On: 04-05-2024, 08:22 AM

12. 
    akaroa1 liked post by caberslash On thread : Beech/Beach sights, the forgotten front sights

    Clearer picture of the new Pedersoli 249399

    Liked On: 04-05-2024, 08:13 AM

13. 
    Micky Duck liked post by caberslash On thread : Acceptable variation in powder charge

    Unless you are rocking an Autotrickler or Prometheus, a good volumetric measure is still more reliable. The top of the line Lee one is very good, but let down by the small reservoir. Harrels...

    Liked On: 30-04-2024, 04:16 PM

14. 
    Micky Duck liked post by caberslash On thread : Sako v tikka

    Better still a Howa :thumbsup:

    Liked On: 28-04-2024, 01:38 PM

15. 
    witchcraft liked post by caberslash On thread : Sako v tikka

    Better still a Howa :thumbsup:

    Liked On: 28-04-2024, 01:22 PM

Page 7 of 67 First 12345678910111213141516171819202157 ... Last

• Jump to page: