I actually made a little pocket bag by putting a hackysack in one of those soft sunglass bags. I put this on top of fenceposts with my 22. Works a treat.
Liked On: 05-10-2023, 02:14 PM
Derek Taylor Not a forum member but an old identity in the ChCh shooting scene, loverly guy, lost his sight to macular degeneraton in his 90s. Still shot 50M shot on shot, great sense of humour,...
Liked On: 05-10-2023, 09:32 AM
The good thing is that they disguise pressure cos they don’t flatten or crater soo quickly. I’m sick of Brian and Rod giving me shit about my loads being “warm” and pointing at my fired cases with...
Liked On: 04-10-2023, 02:45 PM
I use a 2 metre long 1 inch pipe to lie in the rings to line up while looking through the barrel. Works perfectly
Liked On: 03-10-2023, 06:24 PM
With that done it is now that the shaping lines are drawn in and for the bottom line I mark round the top of the trigger guard. https://i.imgur.com/rg4YT8Hl.jpg Next I mark in the forestock...
Liked On: 03-10-2023, 06:19 PM
Time to trim the buffalo horn tip and I find that the fine side of a horse shoe rasp the best for this part of the process and a spacer equal to the height of the teeth above the untoothed end makes...
Liked On: 03-10-2023, 06:18 PM
Hey mate I can give you the run down send me a pm
Liked On: 02-10-2023, 12:37 PM
Just had the wood cleaned up on my Webley Scott and Sons Hammerless hammer shotgun. Pleased with the result!! 234374 234375
Liked On: 29-09-2023, 09:25 AM
Time now to do the forend tip so a piece of buffalo horn had the face trued up on the grinder belt and cut to length https://i.imgur.com/1x2NFiyl.jpg This piece is barely big enough but with...
Liked On: 28-09-2023, 07:02 PM
Was able to get back to this today and got the mag well sorted for a nice slide fit for both 10 and 5 shot mags https://i.imgur.com/nglElZml.jpg After that was done I did the reinforce across...
Liked On: 27-09-2023, 08:58 PM
As cool as Fabio & Stevie Wonder are, I think we could do better No disrespect to Toby but I think it would be great to have a change up, One option could be the forum collective supplying a new...
Liked On: 26-09-2023, 09:40 AM
7.62x51 and .308 Winchester may be used interchangeably in correctly headspaced rifles with perfect safety. While there is a minute difference in the drawing specifications of both, those differences...
Liked On: 25-09-2023, 09:50 AM
Nah day out der 233889
Liked On: 23-09-2023, 06:26 PM
Could be worse, like a guy with a creedmore....
Liked On: 15-09-2023, 09:47 PM
Hey team, So I finally managed a sub moa group. 233018 A bit of back story, it's been over a year of shooting at least one competition a month at the local deerstalkers (having never shot rifle...
Liked On: 13-09-2023, 07:23 PM