Unless your indoors your going to waste time and ammo. Indoor range for .22 testing is almost a given in my opinion Sent from my iPhone using Tapatalk
Liked On: 03-05-2023, 07:28 PM
The mildew feeds on the linseed oil. Sent from my iPhone using Tapatalk
Liked On: 03-05-2023, 12:30 AM
Rl 7 is great for .222 not so good for .223 Sent from my iPhone using Tapatalk
Liked On: 02-05-2023, 06:28 PM
In my Allianz guide, RL25 data for .270 wsm 140 gn 69 gns for 3180 fps 150 gn 64 gns for 3050 fps We cases, cci 200 primers Start 3-4 grains below and work up in 1s on a case of that volume...
Liked On: 02-05-2023, 04:52 PM
If possible relocate safe to a dry ventilated area. If not, wipe your safes out with Ethanol (Glen 10/20) to kill the spores. Do the same with your stocks. Use a silicone based gun oil on the metal...
Liked On: 01-05-2023, 11:33 PM
If possible relocate safe to a dry ventilated area. If not, wipe your safes out with Ethanol (Glen 10/20) to kill the spores. Do the same with your stocks. Use a silicone based gun oil on the metal...
Liked On: 01-05-2023, 10:49 PM
ADI have stopped making pistol/shots he’ll powders for the time being. Sent from my iPhone using Tapatalk
Liked On: 29-04-2023, 09:48 PM
Sea to Summit ultralight insulated is your huckleberry Sent from my iPhone using Tapatalk
Liked On: 29-04-2023, 11:32 AM
Annealing before sizing is the way to go. Annealing after sizing may prevent neck cracking on firing and even neck tension leading to improved accuracy in extreme cases. Sent from my iPhone...
Liked On: 17-04-2023, 04:47 PM
If you want to use .308 brass, one pass through a fls die, load and shoot. Do it frequently when feeling tight. Sent from my iPhone using Tapatalk
Liked On: 11-04-2023, 08:14 AM
I agree with the above, my experience differs. It easy to try and discount if no improvement. Sent from my iPhone using Tapatalk
Liked On: 09-04-2023, 06:46 PM
If you brass is growing After resizing it’s likely that you are not lubing the inside of the case neck. This cases your brass to lengthen on the up stroke of the ram. Sent from my iPhone using...
Liked On: 09-04-2023, 03:51 PM
If you brass is growing After resizing it’s likely that you are not lubing the inside of the case neck. This cases your brass to lengthen on the up stroke of the ram. Sent from my iPhone using...
Liked On: 07-04-2023, 09:38 PM
If you brass is growing After resizing it’s likely that you are not lubing the inside of the case neck. This cases your brass to lengthen on the up stroke of the ram. Sent from my iPhone using...
Liked On: 07-04-2023, 07:25 PM
Best of the game birds in my opinion if shot around grain silos or other grain storage/transporting sites. Sent from my iPhone using Tapatalk
Liked On: 25-03-2023, 08:47 AM