DPT
Member

898 Likes

Page 12 of 60 First 1234567891011121314151617181920212223242526 ... Last

• Jump to page:

1. 
   dannyb liked post by DPT On thread : Useing the firearms register

   I watched a one and a half hour video with the firearm authority doing a presentation and answering questions, this one came up. They said, select one caliber and register it as that. Barrels are not...

   Liked On: 23-06-2023, 07:54 AM

2. 
   Mathias liked post by DPT On thread : Photos of your dog

   This is Max, who lived to a ripe old age of 16, unfortunately we had to bury Max last week, a very difficult time of life. He was a very loyal friend. 226620

   Liked On: 16-06-2023, 08:22 AM

3. 
   Frogfeatures liked post by DPT On thread : Photos of your dog

   This is Max, who lived to a ripe old age of 16, unfortunately we had to bury Max last week, a very difficult time of life. He was a very loyal friend. 226620

   Liked On: 15-06-2023, 02:25 PM

4. 
   Fat belly Dog liked post by DPT On thread : Photos of your dog

   This is Max, who lived to a ripe old age of 16, unfortunately we had to bury Max last week, a very difficult time of life. He was a very loyal friend. 226620

   Liked On: 15-06-2023, 12:32 PM

5. 
   mikee liked post by DPT On thread : Photos of your dog

   This is Max, who lived to a ripe old age of 16, unfortunately we had to bury Max last week, a very difficult time of life. He was a very loyal friend. 226620

   Liked On: 14-06-2023, 11:06 PM

6. 
   Ryan_Songhurst liked post by DPT On thread : Photos of your dog

   This is Max, who lived to a ripe old age of 16, unfortunately we had to bury Max last week, a very difficult time of life. He was a very loyal friend. 226620

   Liked On: 14-06-2023, 10:42 PM

7. 
   Micky Duck liked post by DPT On thread : Suppressor rear bush sizing

   Hi, The rear bush should have 0.05mm clearance, 0.1mm is fine. To confirm its not touching the barrel, firmly screw the suppressor onto the barrel, then unscrew the rear bush, if you feel the bush...

   Liked On: 28-02-2023, 02:20 PM

8. 
   MB liked post by DPT On thread : Suppressor rear bush sizing

   Hi, The rear bush should have 0.05mm clearance, 0.1mm is fine. To confirm its not touching the barrel, firmly screw the suppressor onto the barrel, then unscrew the rear bush, if you feel the bush...

   Liked On: 28-02-2023, 08:50 AM

9. 
   veitnamcam liked post by DPT On thread : Suppressor rear bush sizing

   Hi, The rear bush should have 0.05mm clearance, 0.1mm is fine. To confirm its not touching the barrel, firmly screw the suppressor onto the barrel, then unscrew the rear bush, if you feel the bush...

   Liked On: 28-02-2023, 07:37 AM

10. 
    Bobba liked post by DPT On thread : Suppressor rear bush sizing

    Hi, The rear bush should have 0.05mm clearance, 0.1mm is fine. To confirm its not touching the barrel, firmly screw the suppressor onto the barrel, then unscrew the rear bush, if you feel the bush...

    Liked On: 28-02-2023, 04:40 AM

11. 
    ZQLewis liked post by DPT On thread : Suppressor fit on chopped barrel.

    No you shouldn’t remove any material from the suppressor inner tube, definitely a chance of suppressor failure if you do.

    Liked On: 13-02-2023, 11:40 PM

12. 
    Micky Duck liked post by DPT On thread : Suppressor fit on chopped barrel.

    No you shouldn’t remove any material from the suppressor inner tube, definitely a chance of suppressor failure if you do.

    Liked On: 12-02-2023, 01:59 PM

13. 
    Cigar liked post by DPT On thread : Suppressor fit on chopped barrel.

    No you shouldn’t remove any material from the suppressor inner tube, definitely a chance of suppressor failure if you do.

    Liked On: 12-02-2023, 08:13 AM

14. 
    tetawa liked post by DPT On thread : Suppressor fit on chopped barrel.

    No you shouldn’t remove any material from the suppressor inner tube, definitely a chance of suppressor failure if you do.

    Liked On: 12-02-2023, 06:46 AM

15. 
    Bill999 liked post by DPT On thread : DPT employment

    Hi Guys, We are looking for someone to run our bead blasting cabinet and to help out with parts inspection etc. You will need -An eye for details -Be self-motivated -Reliable and punctual...

    Liked On: 14-12-2022, 03:17 PM

Page 12 of 60 First 1234567891011121314151617181920212223242526 ... Last

• Jump to page: