Greetings iambatman, May I echo what many others and cast a vote for the .308W. I asume that this may be your first hunting rifle and everything about the .308W is just so easy as mentioned above....
Liked On: 21-01-2022, 04:47 PM
Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...
Liked On: 19-01-2022, 10:17 PM
Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...
Liked On: 19-01-2022, 10:17 PM
Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...
Liked On: 19-01-2022, 07:26 PM
Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...
Liked On: 19-01-2022, 05:45 PM
Greetings Trout, Using a cheap plated projectile like the Frontier 150 grain and a reduced load about $20.00 a box of 20. Closer to $30.00 a box of 20 for the cheapest soft points. This is not much...
Liked On: 19-01-2022, 09:24 AM
Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...
Liked On: 19-01-2022, 02:30 AM
Greetings All, My loads for my 2 .303 rifles are very light and the cases are only neck sized. With loads that develop a pressure of about 35,000 CUP the cases do not stretch at all and you can neck...
Liked On: 18-01-2022, 07:25 AM
Greetings All, Until recently I neck sized most of my cases, mostly using cartridge specific neck sizing dies. Recently I have moved over to minimal FL sizing using the Redding competition shell...
Liked On: 17-01-2022, 09:33 PM
Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...
Liked On: 17-01-2022, 12:14 PM
Greetings Stefanhope, I read through your post and responces to date, most of which suggested you load up a batch and go hunting or words to that effect. This is good practical advice. Long ago I...
Liked On: 17-01-2022, 11:09 AM
Greetings Pete_D, I echo much of what has been said before. You state that the aim is for a light load in a short barrel .308 with light projectiles. I note that you have found data on the ADI site...
Liked On: 16-01-2022, 09:05 PM
Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...
Liked On: 16-01-2022, 06:24 PM
Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...
Liked On: 16-01-2022, 06:17 PM
Greetings, There is absolutely nothing wrong with having one load for multiple rifles. The factories do it all the time. For your goat load I suggest around 43 grains of AR2206H. This used to be...
Liked On: 16-01-2022, 05:58 PM