Well looks like you are seeing it again but its the other side, this is the under side of the tang. Nothdude you will be happy to know I used the drill press for all the holes this time, It`s just...
Liked On: 01-05-2020, 01:19 AM
I like using the lathe for everything, it`s just more accurate than the drill press which can wander out of line and the pin holes need to be true and smooth so the last bit was a boring bar for...
Liked On: 01-05-2020, 01:19 AM
No I`m wrong, the pins are press fit in the action, watched a Midway bit on stripping down a roller and the pins are taped out. So pins to action are size for size .454" and the holes in the breech...
Liked On: 30-04-2020, 10:32 PM
No I`m wrong, the pins are press fit in the action, watched a Midway bit on stripping down a roller and the pins are taped out. So pins to action are size for size .454" and the holes in the breech...
Liked On: 29-04-2020, 10:50 PM
I have a bread maker but when its finished baking it`s a hell of a job to get the loaf out of the backing tin, so just use the dough setting. When it`s ready into a baking tin or in this case a cake...
Liked On: 29-04-2020, 07:53 PM
I have a bread maker but when its finished baking it`s a hell of a job to get the loaf out of the backing tin, so just use the dough setting. When it`s ready into a baking tin or in this case a cake...
Liked On: 29-04-2020, 06:56 AM
I have a bread maker but when its finished baking it`s a hell of a job to get the loaf out of the backing tin, so just use the dough setting. When it`s ready into a baking tin or in this case a cake...
Liked On: 28-04-2020, 09:59 PM
I like using the lathe for everything, it`s just more accurate than the drill press which can wander out of line and the pin holes need to be true and smooth so the last bit was a boring bar for...
Liked On: 28-04-2020, 07:54 PM
I have a bread maker but when its finished baking it`s a hell of a job to get the loaf out of the backing tin, so just use the dough setting. When it`s ready into a baking tin or in this case a cake...
Liked On: 28-04-2020, 07:47 PM
I don`t know if I will build all the extra bits, have to see how hard it is or how lazy I am. The round bit is 3.900"dia, and yes I have fly cut a flat on one side, it was going to be the action for...
Liked On: 28-04-2020, 03:50 PM
So the lump is losing a lot of weight, more than I can say about me as my homebrew fridge is in the workshop and I`m good at making tasty loafs of bread. Have setup the lump for what I call fly...
Liked On: 27-04-2020, 08:45 PM
I don`t know if I will build all the extra bits, have to see how hard it is or how lazy I am. The round bit is 3.900"dia, and yes I have fly cut a flat on one side, it was going to be the action for...
Liked On: 27-04-2020, 08:45 PM
Hi guys, I`ve had this large round lump of 1045 steel and keep stubbing my toes on the dam thing, I`ve been chewing at it like a beaver on and off. As I have the plans for a roller I thought bugger ,...
Liked On: 27-04-2020, 08:43 PM
Yer, just had a brew thanks, so with a bit of teko drawing I marked out the spots for top of the action, the two breech and hammer holes. Gives me a line on where to hack saw a lump off, saves a lot...
Liked On: 27-04-2020, 03:32 PM
Yer, just had a brew thanks, so with a bit of teko drawing I marked out the spots for top of the action, the two breech and hammer holes. Gives me a line on where to hack saw a lump off, saves a lot...
Liked On: 26-04-2020, 08:07 PM