I did a version made out of a steel gen 1 ar10 mag by narrowing the front and tapering the follower to suit worked good for 4 rnds and that was ok the main thing was the follower angle was correct...
Liked On: 12-12-2020, 12:14 AM
hi no pics of mag but just cut a strip out of front of mag with a 1mm cut off disc and ground to suit then squeezed together and mig welded /ground flat then cut follower to suit mag . lots of trial...
Liked On: 12-12-2020, 12:14 AM
Mate I’ve got no idea about hardening and tempering steel but can probably ask a knowledgeable engineer fella at work, but I do have a genuine 7.62 lee enfield magazine if you want me to send some...
Liked On: 12-12-2020, 12:03 AM
Well Done! Need more info, What grade of stainless? If its austinetic (Magnet will not stick to it) you are out of luck ie 304 or 316 these can only be work hardened which is not much use to you....
Liked On: 12-12-2020, 12:03 AM