Longranger
Member

77 Likes

Page 2 of 6 First 123456 Last

• Jump to page:

1. 
   Moa Hunter liked post by Longranger On thread : Bore Rust?

   Problem with rust pitting in the bore is it will cause fouling (particularly copper) after a few shots which is detrimental to accuracy.....OK if the shots are few, but a competition barrel shooting...

   Liked On: 10-09-2022, 10:52 AM

2. 
   Moa Hunter liked post by Longranger On thread : Bore Rust?

   For sure it's rust......put a dry patch through and if it is brown there is no doubt. Problem with rust pitting is that there will always now be a layer of rust at the bottom of the pit and that will...

   Liked On: 10-09-2022, 10:48 AM

3. 
   chainsaw liked post by Longranger On thread : Bore Rust?

   For sure it's rust......put a dry patch through and if it is brown there is no doubt. Problem with rust pitting is that there will always now be a layer of rust at the bottom of the pit and that will...

   Liked On: 07-09-2022, 01:36 PM

4. 
   Tikka7mm08 liked post by Longranger On thread : Digital scales

   Like scopes you pay for what you get.....don't touch a Gempro. If you really want an accurate scale, A&D or Satorious which read to 0.02gr are the best. A good balance scale will record one...

   Liked On: 06-09-2022, 09:40 AM

5. 
   XR500 liked post by Longranger On thread : Bore Rust?

   Problem with rust pitting in the bore is it will cause fouling (particularly copper) after a few shots which is detrimental to accuracy.....OK if the shots are few, but a competition barrel shooting...

   Liked On: 06-09-2022, 09:14 AM

6. 
   Bagheera liked post by Longranger On thread : Bore Rust?

   For sure it's rust......put a dry patch through and if it is brown there is no doubt. Problem with rust pitting is that there will always now be a layer of rust at the bottom of the pit and that will...

   Liked On: 05-09-2022, 11:01 PM

7. 
   Moa Hunter liked post by Longranger On thread : Ring/groove at base of case shoulder

   The answer is No......no you're not certain, or no it wasn't there on a first fired case. grandpamac pointed out a fault with the die too. So two things to eliminate.....change your die and...

   Liked On: 17-08-2022, 11:59 AM

8. 
   matagouri liked post by Longranger On thread : Rifles that don't age well

   Mates Sako Finnlight with that shit rubberised coating....sticky not caused by oils or solvents....hardly used and happened within three years of new.

   Liked On: 05-08-2022, 03:40 PM

9. 
   Buckslyr liked post by Longranger On thread : Hello from the US 👋🏻

   Welcome aboard......Utah is one of our favourite states....Bingham copper mine, Hills Air force museum and Bryce Canyon spring to mind. And of course the Browning Museum....never knew Browning was a...

   Liked On: 31-07-2022, 11:07 AM

10. 
    Micky Duck liked post by Longranger On thread : Classic car Rego

    I have a Mitsi L300 that has just turned 40yrs old and the rego is now $47 pa. I did not apply....it just happened automatically. NZTA would not consider any reduction until it reached 40yrs.......I...

    Liked On: 30-07-2022, 09:28 PM

11. 
    Finnwolf liked post by Longranger On thread : Classic car Rego

    I have a Mitsi L300 that has just turned 40yrs old and the rego is now $47 pa. I did not apply....it just happened automatically. NZTA would not consider any reduction until it reached 40yrs.......I...

    Liked On: 30-07-2022, 08:33 PM

12. 
    RV1 liked post by Longranger On thread : How do you prevent rust in your gun safe?

    I use a 7w LED in the bottom of two safes....not so much to heat the safe but to create air movement from the minor heat differential. Check out museum archive storage.....they keep the air fresh by...

    Liked On: 19-07-2022, 02:07 PM

13. 
    PaulNZ liked post by Longranger On thread : How do you prevent rust in your gun safe?

    I use a 7w LED in the bottom of two safes....not so much to heat the safe but to create air movement from the minor heat differential. Check out museum archive storage.....they keep the air fresh by...

    Liked On: 18-07-2022, 04:11 PM

14. 
    Micky Duck liked post by Longranger On thread : primers...what is softest/easiest to ignite???

    Had it happen with a Barnard action with CCI BR-4 SR primer in 308. Only solution was to add an 8mm spacer to the firing pin spring and problem gone away. Same rifle with LR primers never an issue. ...

    Liked On: 17-07-2022, 07:56 PM

15. 
    Moa Hunter liked post by Longranger On thread : How do you prevent rust in your gun safe?

    I use a 7w LED in the bottom of two safes....not so much to heat the safe but to create air movement from the minor heat differential. Check out museum archive storage.....they keep the air fresh by...

    Liked On: 17-07-2022, 12:33 PM

Page 2 of 6 First 123456 Last

• Jump to page: