Pommy
Member

1393 Likes

Page 41 of 93 First ... 272829303132333435363738394041424344454647484950515253545591 ... Last

• Jump to page:

1. 
   Nathan F liked post by Pommy On thread : 223 on deer

   69gr TMK at 307yd. MV of 3050. 205139 Centre shoulder shot dropped him on the spot. Tried to get up very briefly - a few seconds at most and no follow up required. Massive trauma behind the...

   Liked On: 02-09-2022, 07:41 AM

2. 
   caberslash liked post by Pommy On thread : 223 on deer

   69gr TMK at 307yd. MV of 3050. 205139 Centre shoulder shot dropped him on the spot. Tried to get up very briefly - a few seconds at most and no follow up required. Massive trauma behind the...

   Liked On: 02-09-2022, 03:31 AM

3. 
   WildBrad liked post by Pommy On thread : Loading for a 22 Creedmoor

   I had watchlisted that rifle repeatedly. Good buying! Glad to see it's gone to a forum member. If I remember correctly, Peterson have a PDF on their website with some load data. One of the guys...

   Liked On: 01-09-2022, 07:36 AM

4. 
   Steelisreal liked post by Pommy On thread : Getting ES down with 223

   204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

   Liked On: 26-08-2022, 11:05 PM

5. 
   Larskramer liked post by Pommy On thread : Getting ES down with 223

   I use mandrels on a couple of other cartridges after sizing with some other dies but haven't found the need with the forster ones. The tension I get is consistently light. I'm not measuring runout...

   Liked On: 26-08-2022, 10:07 PM

6. 
   Mathias liked post by Pommy On thread : Getting ES down with 223

   204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

   Liked On: 26-08-2022, 08:17 AM

7. 
   Moa Hunter liked post by Pommy On thread : Getting ES down with 223

   204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

   Liked On: 26-08-2022, 01:16 AM

8. 
   Roarless20 liked post by Pommy On thread : Getting ES down with 223

   204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

   Liked On: 25-08-2022, 11:40 PM

9. 
   Tentman liked post by Pommy On thread : Getting ES down with 223

   204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

   Liked On: 25-08-2022, 10:36 PM

10. 
    tikka liked post by Pommy On thread : Getting ES down with 223

    204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

    Liked On: 25-08-2022, 10:26 PM

11. 
    dannyb liked post by Pommy On thread : Getting ES down with 223

    204544 Thought I'd share some recent success I've had doing a quick workup with 50gr ballistic tips and AR2219. Disclaimer: I start 0.6gr ABOVE ADI's listed maximum and end up 2.4gr over....

    Liked On: 25-08-2022, 10:03 PM

12. 
    7mm Rem Mag liked post by Pommy On thread : 6.5 PRC Load Development Begins

    I've started to run low on Re26 and have gotten frustrated with erratic behaviour from it at times anyway, so just switched to AR2225... 202860 Both the last groups come in at 0.290" and 59.2gr...

    Liked On: 21-08-2022, 08:42 AM

13. 
    Puffin liked post by Pommy On thread : ? Head Space

    Tedz50, have you messed around with AI cases before? Because you're supposed to have a crush fit when fireforming. Otherwise you run the risk of case head separations, because the shoulder is...

    Liked On: 20-08-2022, 09:16 AM

14. 
    Bagheera liked post by Pommy On thread : Does this powder have other names?

    Highland is a brand of ammo so could it be powder that's been reclaimed from pulled down ammunition? Even if you can get the info on the batch number from ADI, I wouldn't trust that that's what...

    Liked On: 18-08-2022, 10:54 AM

15. 
    flock liked post by Pommy On thread : Can twist rate be too fast?

    This kinda pre-dates dially scopes when if you wanted to hold fur to 400 or whatever, you needed a faster flatter shooting cartridge. Hence 270 was standardised around 130gr (which only needed a 1:10...

    Liked On: 17-08-2022, 06:42 PM

Page 41 of 93 First ... 272829303132333435363738394041424344454647484950515253545591 ... Last

• Jump to page: