Pommy
Member

1190 Likes

Page 52 of 80 First ... 23839404142434445464748495051525354555657585960616263646566 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Pommy On thread : Getting ES down with 223

   Thanks for the offer. Let's put a pin in that. I'll do another one or two tests and the best load can go into a primer shootout.

   Liked On: 10-07-2021, 09:58 PM

2. 
   Micky Duck liked post by Pommy On thread : Getting ES down with 223

   Round 2... 25.6gn Benchmark 2 Skipped the control group with virgin brass, as the first round showed very little difference between new and fireformed (all else being equal)... Plus I was feeling...

   Liked On: 10-07-2021, 09:57 PM

3. 
   Micky Duck liked post by Pommy On thread : Getting ES down with 223

   Shall apply some graphite to the necks for the brushed cases too.

   Liked On: 10-07-2021, 09:56 PM

4. 
   Micky Duck liked post by Pommy On thread : Getting ES down with 223

   Yep, everything's pretty similar. With those Nosler bullets being quite long, seating them out to 2.350" actually gets them pretty close to the rifling. I am going to try the nylon brush as per...

   Liked On: 10-07-2021, 09:56 PM

5. 
   ebf liked post by Pommy On thread : Getting ES down with 223

   Round 2... 25.6gn Benchmark 2 Skipped the control group with virgin brass, as the first round showed very little difference between new and fireformed (all else being equal)... Plus I was feeling...

   Liked On: 10-07-2021, 09:04 PM

6. 
   Fisherman liked post by Pommy On thread : .223 bullet deflection from twigs and branches

   There's an old doco on YT called deadly weapons, firearms and firepower. Towards the end of part 3 here (https://youtu.be/QlTSS-WFpkg) he does some brush testing and everything fairs pretty similarly.

   Liked On: 09-07-2021, 08:54 PM

7. 
   Tahr liked post by Pommy On thread : N565 & R26 in 6.5PRC - anyone using it?

   I'm getting 2930 with 147's in a 25.5" barrel. Super mild load of AR2217 (to hopefully extend the barrel life) and a CCI 250. Plenty of room to push harder. Have tried Re26 and there's a nice load...

   Liked On: 09-07-2021, 08:45 PM

8. 
   ebf liked post by Pommy On thread : Getting ES down with 223

   Yep, everything's pretty similar. With those Nosler bullets being quite long, seating them out to 2.350" actually gets them pretty close to the rifling. I am going to try the nylon brush as per...

   Liked On: 09-07-2021, 01:41 PM

9. 
   grandpamac liked post by Pommy On thread : Getting ES down with 223

   The crosshair on the Nikon currently mounted to my 223 is quite thick and pretty much obscures those dots. I used the BDC to aim at the dots below, so blowing out the aiming point was not an issue....

   Liked On: 09-07-2021, 11:55 AM

10. 
    Bushwalker liked post by Pommy On thread : .223 bullet deflection from twigs and branches

    There's also a slow mo guys video where a D20 artillery gun gets significantly deflected by a watermelon (https://youtu.be/xpJ8EoGmLuE).

    Liked On: 08-07-2021, 10:20 PM

11. 
    berg243 liked post by Pommy On thread : Getting ES down with 223

    I will post up the numbers so we can all see how much of a difference it does or doesn't make. But let's not assume I haven't already done it for my testing so far.

    Liked On: 08-07-2021, 10:00 AM

12. 
    planenutz liked post by Pommy On thread : .223 bullet deflection from twigs and branches

    There's also a slow mo guys video where a D20 artillery gun gets significantly deflected by a watermelon (https://youtu.be/xpJ8EoGmLuE).

    Liked On: 07-07-2021, 05:08 PM

13. 
    veitnamcam liked post by Pommy On thread : .223 bullet deflection from twigs and branches

    There's also a slow mo guys video where a D20 artillery gun gets significantly deflected by a watermelon (https://youtu.be/xpJ8EoGmLuE).

    Liked On: 07-07-2021, 07:39 AM

14. 
    planenutz liked post by Pommy On thread : Getting ES down with 223

    My "heavy hitting" 223 load is sweet as. TMK's over AR2206H with Lapua brass and Federal primers goes great and I get an ES of about 20 past a labradar and it really lets me stretch the 223 out. I've...

    Liked On: 02-07-2021, 09:45 PM

15. 
    veitnamcam liked post by Pommy On thread : Tikka 223 1-8 or 1-12

    How far do you shoot? It's good to anchor goats to avoid the death screams. I found my 1:12 really started struggling to do that past 200m because the light bullets are really slowing down. 1:8...

    Liked On: 02-07-2021, 08:14 PM

Page 52 of 80 First ... 23839404142434445464748495051525354555657585960616263646566 ... Last

• Jump to page: