Pommy
Member

143 Likes

Page 7 of 10 First 12345678910 Last

• Jump to page:

1. 
   Pommy liked post by Sideshow On thread : rifle bedding kit

   New I needed to get around to doing this. Here is the finished product. Shoots really really well. 139333139334139335139336139337139338

   Liked On: 11-05-2020, 11:08 AM

2. 
   Pommy liked post by Wingman On thread : Sierra & Hornady bullet sections

   123gr 6.5mm Hornady SST 138816 Noslers range Left-to-right Partition, Ballistic Tip, AccuBond, E-Tip 138817

   Liked On: 06-05-2020, 03:14 PM

3. 
   Pommy liked post by Flyblown On thread : Sierra & Hornady bullet sections

   Following on from some recent threads with Q&A on some of the common bullets we use, I thought I'd have another look at the comparative construction using sections, some we've done ourselves (thanks...

   Liked On: 06-05-2020, 02:15 PM

4. 
   Pommy liked post by stug On thread : Who can figure this one out

   First question, is the recoil lug sitting in the slot properly. It is possible to re-assemble a T3 and not have the lug sitting in the slot in the action properly. When you say "tap the turrets"...

   Liked On: 06-05-2020, 12:29 PM

5. 
   Pommy liked post by Mathias On thread : 6.5 grendel projectiles and powder results.

   Well put, each rifle to their own liking. 8208 worked better than CFE223 in mine with the 120-123gr. I haven't bothered with lighter as mine is just for out to 250 at max.

   Liked On: 05-05-2020, 06:56 PM

6. 
   Pommy liked post by Wingman On thread : 300 Blackout barrel length

   You need to consider the donor platorm you are working with. The .222 Brno fox has a shorter mag than the later CZ527 .222. The Fox had different length mags and bottom metal for all the...

   Liked On: 02-05-2020, 11:20 AM

7. 
   Pommy liked post by Tentman On thread : Belmont rifle powder 763

   Pommy's suggested search raised this site The Ballistic Assistant (http://www.theballisticassistant.com/) which is worth a look if you're interested in propellants etc

   Liked On: 29-04-2020, 10:30 AM

8. 
   Pommy liked post by MSL On thread : 300wsm heavies

   H335, lots of it Sent from my iPhone using Tapatalk

   Liked On: 25-04-2020, 11:24 PM

9. 
   Pommy liked post by Wingman On thread : .30BR Rem 788 Chassis build

   All that was left to do was scope it and develop a load for it. The owner dropped off a new Bushnell Forge FFP scope for it which I fitted up and got to the loading bench. ...

   Liked On: 17-04-2020, 06:12 PM

10. 
    Pommy liked post by 10-Ring On thread : 18 inch 308 powder

    AR2208 is a fine powder with 165/180gr bullets but many reloader's have found (myself included) AR2206H to be a better choice with the lighter 125/150gr bullets in shorter barrelled .308 rifles....

    Liked On: 17-04-2020, 10:18 AM

11. 
    Pommy liked post by Mathias On thread : 6.5 Grendel Bolt action

    Ok, here we go then as per request. The original MAB barrel didn't go so well as it had fault with a slightly tapered bore, so it got redone with a Hardy barrel, which has been excellent. As...

    Liked On: 14-04-2020, 01:38 PM

12. 
    Pommy liked post by Woody On thread : 308 projectiles, who's using what for hunting?

    150 or 165 grain sierra sbt or spt. Accurate and reliable.

    Liked On: 11-04-2020, 11:30 PM

13. 
    Pommy liked post by Flyblown On thread : What little pesties did you bowl over today?

    More 'pie action with the distress calls. There's two more hung up in the pines... The juvenile mob thought they were onto a winner with some territory they could claim as their own. Ha! The dog...

    Liked On: 07-04-2020, 10:40 AM

14. 
    Pommy liked post by Moutere On thread : Short deer/pig/goat rifles for the tight stuff (lets see em)

    134901

    Liked On: 06-04-2020, 04:47 PM

15. 
    Pommy liked post by Steve123 On thread : Short deer/pig/goat rifles for the tight stuff (lets see em)

    If that's your idea of tight bush/scrub I truly envy you. Come north for a look Sent from my SM-G390Y using Tapatalk

    Liked On: 06-04-2020, 11:51 AM

Page 7 of 10 First 12345678910 Last

• Jump to page: