.257 improved here, 19" barrel takes 55gr of 2213SC behind the 115gr Berger VLD for 2940 ft/sec. 3150ft/sec when the barrel was 24". Quite a hot load, just under where pockets begin to open. The...
Liked On: 23-06-2018, 10:40 AM
Having had the Labradar out for the first time yesterday I thought I’d also post a few comments on some aspects of the Labradar set-up, use, and results - a part review and hopefully also a part...
Liked On: 21-06-2018, 12:31 PM
Having had the Labradar out for the first time yesterday I thought I’d also post a few comments on some aspects of the Labradar set-up, use, and results - a part review and hopefully also a part...
Liked On: 16-06-2018, 06:13 PM
Having had the Labradar out for the first time yesterday I thought I’d also post a few comments on some aspects of the Labradar set-up, use, and results - a part review and hopefully also a part...
Liked On: 16-06-2018, 12:54 PM
Mmmmn...Modelo1909, hinged floorplate in blued steel...very nice not sure about the calibre though, I can't imagine the Argies would be happy with that. I can picture that sun on their flag with...
Liked On: 15-06-2018, 10:34 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 11-06-2018, 10:07 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 11-06-2018, 05:50 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 11-06-2018, 12:10 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 11-06-2018, 11:36 AM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 11-06-2018, 09:45 AM
More things to consider in this thread: https://www.nzhuntingandshooting.co.nz/f32/what-target-design-why-25207/ As Bagheera mentions, in theory more precise alignment should be possible by...
Liked On: 10-06-2018, 12:51 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 10-06-2018, 12:11 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 09-06-2018, 09:35 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 09-06-2018, 05:55 PM
Review: Model B Neck Turning Tool and accessories from PMA Tool For a review of the PMA neck turning tool I was unsure what to include. If writing for forum members familiar with the process...
Liked On: 09-06-2018, 04:35 PM