shooternz
Member

979 Likes

Page 45 of 66 First ... 3132333435363738394041424344454647484950515253545556575859 ... Last

• Jump to page:

1. 
   Steve123 liked post by shooternz On thread : Nazis successfully complete invasion 70 years later

   The west is turning into a bunch of spineless pussies

   Liked On: 21-08-2018, 11:40 PM

2. 
   veitnamcam liked post by shooternz On thread : .308 WIN Sub Sonic Load - Nosler 30 cal 220 gr Projectiles

   Trail Boss is the easiest powder to load subsonic, With cast bullets 8.5 grains gets you in the ball park with jacketed you need a little more try 12.00 grains be careful getting a jacketed bullet...

   Liked On: 20-08-2018, 10:52 PM

3. 
   Micky Duck liked post by shooternz On thread : .308 WIN Sub Sonic Load - Nosler 30 cal 220 gr Projectiles

   Trail Boss is the easiest powder to load subsonic, With cast bullets 8.5 grains gets you in the ball park with jacketed you need a little more try 12.00 grains be careful getting a jacketed bullet...

   Liked On: 17-08-2018, 08:10 PM

4. 
   bigbugger liked post by shooternz On thread : .308 WIN Sub Sonic Load - Nosler 30 cal 220 gr Projectiles

   Trail Boss is the easiest powder to load subsonic, With cast bullets 8.5 grains gets you in the ball park with jacketed you need a little more try 12.00 grains be careful getting a jacketed bullet...

   Liked On: 17-08-2018, 02:41 PM

5. 
   Dreamer liked post by shooternz On thread : Sako why no 223 ???

   The trouble with rechambering a .222 is they have 1:14" twists so unless you want to limit bullets to 52 grains or under it's a waste of a perfectly good .222, I have both and use the .222 much more...

   Liked On: 17-08-2018, 12:09 PM

6. 
   dannyb liked post by shooternz On thread : Sako why no 223 ???

   The trouble with rechambering a .222 is they have 1:14" twists so unless you want to limit bullets to 52 grains or under it's a waste of a perfectly good .222, I have both and use the .222 much more...

   Liked On: 16-08-2018, 03:41 PM

7. 
   Cordite liked post by shooternz On thread : Expert says 3D printed guns will not raise major concerns in NZ

   Typical news media over reaction, a 3D printer capable of printing a gun is $100,000 to $500,000 would be much cheaper and easier to buy a CNC machine and a Lathe and make one out of steel or go...

   Liked On: 07-08-2018, 12:00 PM

8. 
   marky123 liked post by shooternz On thread : Tiptoeing past max load

   Yes because some clowns don't know how to find their own maximums with out blowing their guns up, It seems starting at the top book load then backing off is the way to go these days, Start with the...

   Liked On: 04-08-2018, 04:11 PM

9. 
   outlander liked post by shooternz On thread : Fastways Courier Calling The Cops?

   Your insurance does not cover anything you send to some one else I checked with two Insurance companies I have policies with when I sent a rifle to it's new owner both said once it leaves your hands...

   Liked On: 31-07-2018, 10:36 AM

10. 
    Micky Duck liked post by shooternz On thread : My new toy: a .500 S&W

    Do some research first I don't think the standard twist will handle 700 grain projectiles at subsonic velocities, I sell a 500 grain cast if you are interested, check TM I will list it.

    Liked On: 27-07-2018, 09:29 PM

11. 
    KaneB liked post by shooternz On thread : Best 7.62x39 subsonic loads and tips

    The black stuff is only carbon and bullet lube, if the lube runs out before the projectile leaves the barrel you will get leading, check the muzzle it should have a star shaped deposit of lube if so...

    Liked On: 20-07-2018, 07:30 PM

12. 
    Micky Duck liked post by shooternz On thread : Best 7.62x39 subsonic loads and tips

    The black stuff is only carbon and bullet lube, if the lube runs out before the projectile leaves the barrel you will get leading, check the muzzle it should have a star shaped deposit of lube if so...

    Liked On: 18-07-2018, 07:17 PM

13. 
    Micky Duck liked post by shooternz On thread : Best 7.62x39 subsonic loads and tips

    Here is one recovered from a goat shot at 40 metres velocity 1021FPS, 91302 I size them .310" so they will work in .308 win and 7.62x39 the 39 bore diameter is .300" groove diameter is .310" the...

    Liked On: 17-07-2018, 06:55 PM

14. 
    Tommy liked post by shooternz On thread : Best 7.62x39 subsonic loads and tips

    Here is one recovered from a goat shot at 40 metres velocity 1021FPS, 91302 I size them .310" so they will work in .308 win and 7.62x39 the 39 bore diameter is .300" groove diameter is .310" the...

    Liked On: 17-07-2018, 05:51 PM

15. 
    bigbugger liked post by shooternz On thread : Best 7.62x39 subsonic loads and tips

    Here is one recovered from a goat shot at 40 metres velocity 1021FPS, 91302 I size them .310" so they will work in .308 win and 7.62x39 the 39 bore diameter is .300" groove diameter is .310" the...

    Liked On: 17-07-2018, 04:57 PM

Page 45 of 66 First ... 3132333435363738394041424344454647484950515253545556575859 ... Last

• Jump to page: