shooternz
Member

904 Likes

Page 58 of 61 First ... 8444546474849505152535455565758596061 Last

• Jump to page:

1. 
   shooternz liked post by ebf On thread : Help from the knowledge bank

   Um, take it from someone who shoots a fair amount of long distances in wind using non-magnum calibers... 162 amax @ 2500 (sedate out of a 7mm08) 12mph full value wind = around 7.0moa 162 amax @...

   Liked On: 27-03-2015, 09:45 AM

2. 
   shooternz liked post by 199p On thread : Help from the knowledge bank

   You dont need a magnum for 400 but to shoot 400 in the wind you do. Its about bucking the wind not the drop. I think a 280 would do you well, not quite a magnum but better performance then 7mm08....

   Liked On: 27-03-2015, 09:44 AM

3. 
   shooternz liked post by veitnamcam On thread : subsonic 308

   No not required and will fuck your brass for full power loads.

   Liked On: 22-03-2015, 04:41 PM

4. 
   shooternz liked post by dskd On thread : bows suck !

   34868 just got my 1st bow i think i need some lessons :yuush:

   Liked On: 20-03-2015, 12:40 AM

5. 
   shooternz liked post by Kscott On thread : first reloading setup

   Agreed, it depends on the definition of 'volume'. I use a progressive unit for high volume (batches of 500 at a time and they get shot within a couple of weeks) and a Lee single stage for my rifle...

   Liked On: 19-03-2015, 04:55 PM

6. 
   shooternz liked post by Marty Henry On thread : first reloading setup

   Probably best to start with a single stage to decide if you like it. I crank out round 50 223 at a session, and as above it's relaxing. It's easy to not save money by reloading and only shooting...

   Liked On: 19-03-2015, 04:55 PM

7. 
   shooternz liked post by shift14 On thread : I think we are about to get F******

   It's not about the politics and I don't think its about the retailer, I'll try and explain my thoughts. Me and the cook are both PAYE workers....we effectively pay in PAYE enough to pay a Senior...

   Liked On: 18-03-2015, 10:44 PM

8. 
   shooternz liked post by veitnamcam On thread : Short barrels and decebels

   Just another bloody thing on the rifle.

   Liked On: 18-03-2015, 10:28 PM

9. 
   shooternz liked post by Philipo On thread : suppressor failure

   Right after 5 page's of dribble, here's my take on things Take it from someone that had a "light weight magnum suppressor" fail ( and yes there's no point dancing around not naming...

   Liked On: 17-03-2015, 01:12 PM

10. 
    shooternz liked post by Danny On thread : Seating depth

    Technical. I just push one up the spout out long and know that that's at lands. Then work back from there.

    Liked On: 13-03-2015, 11:14 PM

11. 
    shooternz liked post by Moutere On thread : Angle Compensation

    Gravity is a constant regardless of angle, it is just acting over a shorter horizontal distance than the LOS distance in an angled shot.

    Liked On: 06-03-2015, 12:38 PM

12. 
    shooternz liked post by Driverman On thread : who else casts there own bullets

    I cast for 303,308,7.62x39,9mm,357,44mag,45acp,and a few others. Temp is important as is alloy. I suggest you look at the cast boolit website. You will need a spare year or two to read it all. Never...

    Liked On: 06-03-2015, 12:08 PM

13. 
    shooternz liked post by gundoc On thread : Rebarrelling a short action Remington

    Don't bother with wildcats, they are more trouble than they are worth. Get a good quality 22" barrel fitted in either 7mm-08 or .308 (shouldn't exceed $800). Either will do the job perfectly well...

    Liked On: 11-02-2015, 01:09 PM

14. 
    shooternz liked post by BushHunter On thread : Winchester Model 70 XTR Featherweight

    Just got one. Nice rifle. 33871

    Liked On: 06-02-2015, 01:47 PM

15. 
    shooternz liked post by Spanners On thread : Anyone shooting a .40 S&W?

    More expensive if you are counting pennies (literally) S&W = soft and weak 10mm = :D

    Liked On: 27-12-2014, 12:34 PM

Page 58 of 61 First ... 8444546474849505152535455565758596061 Last

• Jump to page: