shooternz
Member

904 Likes

Page 9 of 61 First 123456789101112131415161718192021222359 ... Last

• Jump to page:

1. 
   shooternz liked post by Hayden On thread : Projectile choice 284

   I’m using 150NBTs in my 284. Bang flop. Nut behind the butt is more important IMO

   Liked On: 21-10-2021, 12:56 AM

2. 
   shooternz liked post by Longranger On thread : Shoulder bump question

   ebf I think you will find the custom die is not made from the chamber reamer. I make my own dies from what is called a resize reamer....some 0.004" smaller on critical dimensions. There is no way a...

   Liked On: 18-10-2021, 09:25 PM

3. 
   shooternz liked post by Jhon On thread : Hornady projectiles

   Go to cast bullets.. Rob Walker makes a very decent 6.5mm gas checked flat point good to between 1400-1800 fps in around 1:8 twist or slower. Perfectly good killer out to 100 plus a bit meters. Or...

   Liked On: 17-10-2021, 12:57 PM

4. 
   shooternz liked post by Dermastor On thread : New F Class setup and advice

   PRS can be real gear race but it doesn't need to be. Many shooters who compete start out with reasonably basic rifles and go from there if they continue to compete. If you want to start from scratch...

   Liked On: 11-10-2021, 09:56 AM

5. 
   shooternz liked post by Jhon On thread : 44-40 Reloading/Shooting

   Re reading this thread and I realise shooternz that I mis-understood which bullet you were referring to. Thought you were asking after the Lyman 429-244. Here is picture of the Hawke Targets ...

   Liked On: 25-09-2021, 01:41 PM

6. 
   shooternz liked post by Allizdog On thread : Hunting with subs in 300BLK

   What you don't have in velocity, it's better to make up for in bore size and weight. Unless you can reload specialist projectiles, get a big cal.

   Liked On: 11-09-2021, 07:57 PM

7. 
   shooternz liked post by MB On thread : Hunting with subs in 300BLK

   Another Sub-X fail today. Shot a goat mid-neck at 5 metres. It went down, then got up and ran 50 metres. Huge blood trail, but I was lucky to find it in dense bush. Might as well take up bow hunting!

   Liked On: 11-09-2021, 02:42 PM

8. 
   shooternz liked post by Flyblown On thread : 300blk Loading Tips

   Robert’s 151gr .308 cal shot from a .308 subsonic round @1100fps. Large nanny standing about 25m above me, facing away and browsing on steep ground facing uphill. In behind the ribcage low down,...

   Liked On: 06-09-2021, 09:44 PM

9. 
   shooternz liked post by ebf On thread : Bergara BA13 Trigger tune

   Jit, the trigger on my 308 BA13 is the best (crisp) factory trigger I own. I can measure the pull weight of it if you want, but would not describe it as unduly heavy. Absolutely fine as is for a...

   Liked On: 03-09-2021, 02:14 PM

10. 
    shooternz liked post by zimmer On thread : RCBS Chargemaster lite

    I have bought virtually all my reloading gear ex USA and that included big ticket items like my Chargemaster and Benchsource annealer. Nowadays if buying say a Chargemaster I would look at local...

    Liked On: 25-08-2021, 12:56 PM

11. 
    shooternz liked post by Friwi On thread : Suppressing a 45/70

    If you have your eyes set on the henry that is fine. But just to let you know, there is a bergara single shot as well imported in the country that comes with the barrel already threaded. I would try...

    Liked On: 24-08-2021, 10:13 AM

12. 
    shooternz liked post by Cyclops On thread : Reloading begginer info needed

    The advice I offered (just a couple of days ago): Find a reloader locally who'll take you under his (or her) wing and mentor you. Find & join a club & range, target shooting or hunting, locally...

    Liked On: 23-08-2021, 05:09 PM

13. 
    shooternz liked post by superdiver On thread : Subsonic 7mm loads

    I thought with subs size was key as you cannot rely on shock. Having seen 308 and 300blks struggle on game I would personally stick with 35-40cal if I wanted gun to shoot subs.

    Liked On: 21-08-2021, 11:52 AM

14. 
    shooternz liked post by Cyclops On thread : How accurate are your beam scales?

    Calibrated weights are available in NZ. I bought some recently to test & calibrate a digital scale. I couldn't figure out why the website kept asking me if I was over 18. Turned out the...

    Liked On: 15-08-2021, 11:56 AM

15. 
    shooternz liked post by TARGEX On thread : Projectile performance

    Hi guys, seem to have had a message come through wanting my thoughts. OK first is everyone wants max BC on their bullets as its the popular thing BUT it comes at a cost. To get higher & higher BC...

    Liked On: 14-08-2021, 01:09 AM

Page 9 of 61 First 123456789101112131415161718192021222359 ... Last

• Jump to page: