Just keep ff the relevant S&R frequencies in the SI :P It was tourists using Baofangs that majorly jammed things a few years back down south wasn't it?
Liked On: 15-09-2023, 09:25 PM
Unless it's really crook the extension lead shouldn't be an issue. But try it at any rate.
Liked On: 15-09-2023, 08:47 PM
My RCBS started doing strange things. Stopping well short of required setting. I traced it to the power supply. Tested sorta OK but I replaced it and no further problems.
Liked On: 15-09-2023, 08:47 PM
My RCBS started doing strange things. Stopping well short of required setting. I traced it to the power supply. Tested sorta OK but I replaced it and no further problems.
Liked On: 15-09-2023, 07:58 PM
Just keep ff the relevant S&R frequencies in the SI :P It was tourists using Baofangs that majorly jammed things a few years back down south wasn't it?
Liked On: 15-09-2023, 07:48 PM
Pretty much a universal reloading rule - don't mix your brass. As long as you aren't hot rodding you will probably be OK. Although even with my hunting loads I batched my brass to get the most...
Liked On: 15-09-2023, 01:02 PM
I think the smaller flash hole is a plus but the S&B just weren't as good as the WW SX plus I have a lot of the Win cases.
Liked On: 14-09-2023, 12:44 PM
My Savage 32/20 wouldn't perform with cast boolits. I tried several weights and several brands including factory Starline. Barrel is VG+. Swapped to 100gr Hdy XTP HP and got excellent results at 50...
Liked On: 14-09-2023, 09:00 AM
S&B Hornet cases have a smaller flash hole than WW or RP. That is the problem. Standard Hornet dies de-capping pins jam in the S&B flash holes. I found that some de-capped OK, just, whilst others the...
Liked On: 14-09-2023, 09:00 AM
My Savage 32/20 wouldn't perform with cast boolits. I tried several weights and several brands including factory Starline. Barrel is VG+. Swapped to 100gr Hdy XTP HP and got excellent results at 50...
Liked On: 13-09-2023, 08:09 PM
They used to produce CB (conical) and BB caps for gallery guns. I have a round tin of the BB version. No powder, just the energy of the primer. Mine are acorn marked as well. IIRC the tin is...
Liked On: 13-09-2023, 08:05 PM
In my apprenticeship I worked in a fert works. There a crushing hall with 2 ball mills crushing phosphate rock. The noise levels were extremely high. The company introduced and supplied the operators...
Liked On: 13-09-2023, 05:25 PM
In my apprenticeship I worked in a fert works. There a crushing hall with 2 ball mills crushing phosphate rock. The noise levels were extremely high. The company introduced and supplied the operators...
Liked On: 13-09-2023, 01:47 PM
Nice grouping. Always satisfying to get a good result out of a Hornet. I've got 2 Savage Model 23 rifles. One in 22rf and one in 32/20. I just missed a 25/20 (23B) in an auction a few years back....
Liked On: 12-09-2023, 07:58 PM
Remember as a kid shooting my first black rabbit. It was deemed good luck back then. IIRC I cured the skin with kero and backing soda and it lasted for years. Now blacks seem quite common, well in...
Liked On: 12-09-2023, 04:40 PM