I have not used any rivets. I instead used chicago screws . the dome is the nut side of the screw and the screw side is the same dome shape with a screwdriver slot as can be seen in the rear photo of the antler knife sheath. the bk7 sheath has the dome part in the back of the sheath (painted black) and I used the brass screws instead of the screw part of the chicago screw , simply because I thought the brass looked a bit classier. I wanted to be able to dissassmble everything so I could chop or change parts and mounting systems at will , all I need is a screw driver . I can carry most of the sheaths in the photos in 5 or 6 different ways by just configuring them differently by swapping out parts or leaving them off , such as horizontal or vertical carry by leaving on or removing the belt loop for example and can even switch them from left to right hand side carry by just unscrewing and reversing the sleeve and belt loops. And with the long extra strap running down the back of the bk7 sheath from the belt loop makes it simple to strap to a pack . simple and effective way to add some modularity to a leather sheath....
Bookmarks