Thread: 270 bushpig

Originally Posted by Ryan_Songhurst

The mentioned bedding system is very agricultural, instead of proper pillars they just pack a heap of washers in there until it's about right. The bolt can turn right around 180 degrees in the action and jam in that position requiring a lengthy disassembly process to rectify, once my one did that once it was out the door for me, I thought it was maybe just a flaw with mine but I had a look at another one in a store and managed to make that one do it also - much to the dismay of the pushy salesman who was busy telling me how much of a European engineering masterpiece it was. A forum member here was given one to do a review for a prominent magazine and we managed to get that one to do it also, it was comical how heavily edited the article in the magazine was compared to his real thoughts on it.

Ah yes I remember you or someone else on the forum commenting on the issue of the bolt binding up because of over rotation. I have tried to replicate this with my rifle and failed. Nor does mine have the stack of washers under either of the bedding screw. My rifle is only about 4 months old, maybe these issues have since been addressed at the factory. Both should be pretty simple things to sort out. The bolt over rotation would be because the bolt stop which ride in a groove on the LHS of the bolt is not engaging that groove sufficiently. So the simple fix would be to increase that contact by modifying the bolt stop. I guess the reason I bought one was the price at the time was around 2/3 what I would have paid for another Tikka and the reviews I read online were in general pretty favorable. Every factory rifle has is weak points (faults). Like the horrible low comb on my Tikka stock (fixed with a $1000 stock upgrade) and the fact that to get a 5 round mag in the rifle you have to accept it poking below the stock.