Hi, Anyone else ride MTBs with their dogs?, I have been out of the bush for a few weeks with a crook ankle and trying to gain fitness back I have been doing more rides with the dog, do a...
Liked On: 07-06-2022, 06:33 PM
To be fair If you need the latest load data on the latest chamberings and Powders I have bought the subscription for $22 per year of hornady. Great for research and load development starting points....
Liked On: 07-06-2022, 02:18 PM
Hi all, Download here: https://drive.google.com/file/d/1t5pzE4ehZ-ZypU7et923uTOH2jP0_Pn0/view?usp=drivesdk Book over 1k pages so don't reccomend trying to look at it over google drive. ...
Liked On: 07-06-2022, 02:18 PM
Don't worry about the primers you are working at the bottom of the load density range, In a .308 most use 8.0 grains of Trail Boss for about 1040 fps so you have plenty of spread left in the...
Liked On: 07-06-2022, 10:16 AM
Thanks Plinky, short, concise and to the point. Clearly not a politician
Liked On: 07-06-2022, 10:16 AM
I initially used magnum primers when I started loading subs in my 308win as I recall I had be advised to (somewhere) and never had any issues with load development or general shooting. I settled on...
Liked On: 06-06-2022, 09:41 AM
just be careful......SOME trailboss loads can give high pressure.......high pressure and pistol primers=trouble. do your research and crunch the numbers.
Liked On: 05-06-2022, 11:04 PM
go for it...you will not be disappointed with them...fun, fun, fun, for plinking and at low supersonic levels great projectiles full stop. and yes the magnum primers added velocity and noise......
Liked On: 05-06-2022, 09:55 PM
Magnum primers provide a slightly bigger spark than standard primers. There's no reason they'll be unable to ignite the powder properly. There's a theory that "having just enough primer to get...
Liked On: 05-06-2022, 09:54 PM
been there done that......no worries at all UNLESS you trying to go subsonic...in the 7.6239mm case I was going down to stupidly light powder charges to get noise down/velocity below...
Liked On: 05-06-2022, 09:38 PM
Leave the sticky there Line the sticky with tinfoil, which will adhere to the inside of the tube, and keep using it Then order a new one
Liked On: 05-06-2022, 09:13 PM
well,that touched a nerve...but you have shot yourself in the foot somewhat....IF you put a high BC projectile into a .30/30 ...rangefind and dial up...it will do the job too,after all a 150grn...
Liked On: 04-06-2022, 12:16 PM
I couldn't bring myself to spend the coin on a plastic gun vice so I whipped up this lil ripper out of some scrap bits of Rimu and car seat leather. 196752196753196754
Liked On: 03-06-2022, 10:08 PM
worst case senario...you have one up the spout having been single fed and something else in magazine..... they are great projectiles....
Liked On: 03-06-2022, 07:47 PM
No issues in my 308win but in the 300 blackout I can only single feed on top of empty magazine.
Liked On: 03-06-2022, 07:19 PM