That's one ginormous rabbit 181826
Liked On: 26-10-2021, 09:15 AM
Hi All I'd like to share the project I started since the 2021 lock down. The idea is taken from the AutoTrickler v2, but using the Hornady vibratory trickler instead of the the rotary trickler. ...
Liked On: 12-10-2021, 08:05 PM
I've got things I should be doing outside (well that's what I'm told) but here's some more measurements. Make what you like of them. 180157
Liked On: 01-10-2021, 09:20 AM
Hi there, thank you for the nice comments on my bullets. I try to make the best bullets I can so its nice to get good feedback. The 6.5mm are still happening but I am at the mercy of the die makers...
Liked On: 16-09-2021, 11:29 AM
2 tyres, chain, round gong, some concrete. Suspend a round gong inside the farther away tyre. Collect spalled lead with no digging required. Anchoring the tyres with some rebar pegs may be...
Liked On: 27-08-2021, 12:25 PM
Ive been faffing around with a bunch of Lee Enfields of late, returning the best of them to full wood and parting out others etc. Its been a while since I did any work on these old girls and I wanted...
Liked On: 27-08-2021, 09:34 AM
There is over 0.360 of the bullet in the neck, being a BT approx 0.230 is bearing surface which is still greater than bullet dia of 0.264. 176068
Liked On: 24-08-2021, 02:40 PM
The way you cut through the skin can determine how much hair gets on the meat. I try to cut from in to out rather than out to in. This help reduce the amount of actual hair I am cutting.
Liked On: 19-08-2021, 01:54 PM
I reckon a .308 would do the trick….[emoji848] Sent from my iPhone using Tapatalk
Liked On: 16-08-2021, 03:27 PM
With no input from myself, Mr Pommy has achieved this... 40gr hornady vmax with AR2219
Liked On: 13-08-2021, 08:52 PM
Interesting, never thought of it that way! Makes sense though[emoji848] Sent from my iPhone using Tapatalk
Liked On: 09-08-2021, 05:07 PM
Good stuff. That’s what the forums for.
Liked On: 28-07-2021, 10:17 AM
Nice. Good thinking, a wee bit of work, and results.
Liked On: 26-07-2021, 11:01 AM
After a long wait I received a Contender G2 stainless steel 23" 6.8 SPC barrel recently It was a parked project for when I had some time to sort it out Well ill health meant I suddenly had a bit of...
Liked On: 26-07-2021, 10:47 AM
You are shooting a 7x57 converted in the 1950s. An early 50's convert will more likely be to 7.62×51mm CETME Note the CETME, not NATO. CETME is less powerful. The original projectiles were...
Liked On: 23-07-2021, 01:21 PM