YosemiteSam
Member

139 Likes

Page 1 of 10 12345678910 Last

• Jump to page:

1. 
   YosemiteSam liked post by ROKTOY On thread : 4x4 Paint job options

   Heck, Chuck on a coat of blackboard paint and give the kids some chalk.

   Liked On: 20-03-2023, 05:09 PM

2. 
   YosemiteSam liked post by Danger Mouse On thread : Firearms ban in Western aussie

   Nz deerstalkers got a quick lesson in that. Plonkers

   Liked On: 17-02-2023, 08:28 PM

3. 
   YosemiteSam liked post by gundoc On thread : Dumb question about shooting

   The problem is subject to a steadily increasing error factor that increases exponentially. Bullet stability, velocity, wind, mirage, temperature variation, barrel harmonics, personal ability, etc....

   Liked On: 17-02-2023, 11:56 AM

4. 
   YosemiteSam liked post by Micky Duck On thread : Tops hunting newbie

   plenty water and the likes of a jetboil..or even beercan cooker for "many heaps cupsa tea" or coffee if thats your flavour..or latte if your a 7mm/08 user..or chai latte if you man of outstanding...

   Liked On: 16-02-2023, 03:51 PM

5. 
   YosemiteSam liked post by Tentman On thread : Action screw spacing problem

   Make sure it's the rear action scew hole that's misplaced. If it's the front one your recoil lug may not bear properly (bedding it would fix that). Otherwise drilling out the rear action screw...

   Liked On: 14-02-2023, 08:42 PM

6. 
   YosemiteSam liked post by MCCPRO On thread : Suppressor fit on chopped barrel.

   I have luckily been able to move a few supressors from rifle to rifle as many do. 1/2x20 mostly But I have run into this problem before. Cant speak for DPT but Ive had supressors that the end of...

   Liked On: 11-02-2023, 10:16 PM

7. 
   YosemiteSam liked post by Friwi On thread : Leupold scope

   The point of a cds turret is to be able to compensate for your bullet trajectory Accurately and Repetitively so that you can take the longer shots between 300 and 500m with your basic vx3. Un less...

   Liked On: 05-02-2023, 04:37 PM

8. 
   YosemiteSam liked post by timattalon On thread : How to get rid of an old stock?

   Fair call.

   Liked On: 29-01-2023, 05:09 PM

9. 
   YosemiteSam liked post by Fisherman On thread : How to get rid of an old stock?

   The thing is to drown the cop shop with mail order forms to force common sense...dont be burning stocks

   Liked On: 29-01-2023, 09:33 AM

10. 
    YosemiteSam liked post by canross On thread : How to get rid of an old stock?

    Looks like you've already got it sorted, but for others in the future who come here looking for an answer to a similar question: you only need a permit to send firearms parts where you aren't doing a...

    Liked On: 28-01-2023, 03:56 PM

11. 
    YosemiteSam liked post by Dama dama On thread : How to get rid of an old stock?

    YosemiteSam I'd take the Howa stock off your hands if you don't want it. As long as you are happy for me to swing by and pick it up.

    Liked On: 27-01-2023, 08:54 PM

12. 
    YosemiteSam liked post by stug On thread : How to get rid of an old stock?

    Doubt it, you can surrender any firearm or parts to the police that you want. This clause says that destruction of any firearm part needs to be reported to the Police....

    Liked On: 27-01-2023, 07:38 PM

13. 
    YosemiteSam liked post by Marty Henry On thread : Replacing action bolts

    No if it's action bedded all the screws do is keep it there. If it's pressure bedded instead and the unthreaded shaft portion on the original ones is a tight fit there might be the potential for a...

    Liked On: 23-01-2023, 02:56 PM

14. 
    YosemiteSam liked post by Fat ninja On thread : Pard ta62-35 settings

    There is sleep mode on the units YosemiteSam

    Liked On: 20-01-2023, 01:51 PM

15. 
    YosemiteSam liked post by JohnDuxbury On thread : Leithen Bush

    They changed it a little while ago, it used to be Open permit, but now you have to ring the DOC office in Invercargill.

    Liked On: 26-12-2022, 08:07 AM

Page 1 of 10 12345678910 Last

• Jump to page: