Loading Blocks. The bottom one is the first thing I made when starting out. These ones don't melt when you spray them with lube! 235012 Home made Concentricity Gauge on the left. Does a slightly...
Liked On: 08-10-2023, 08:21 PM
Out hammering staples with a NF?
Liked On: 08-10-2023, 07:34 PM
Out hammering staples with a NF?
Liked On: 08-10-2023, 06:06 PM
Loading Blocks. The bottom one is the first thing I made when starting out. These ones don't melt when you spray them with lube! 235012 Home made Concentricity Gauge on the left. Does a slightly...
Liked On: 08-10-2023, 06:05 PM
Loading Blocks. The bottom one is the first thing I made when starting out. These ones don't melt when you spray them with lube! 235012 Home made Concentricity Gauge on the left. Does a slightly...
Liked On: 08-10-2023, 04:42 PM
Here's the SAAMI specs so the new primer shown is within spec. I'll do some measurements for comparison later today. CCI I have found have a wide range of thickness with BR primers out to 127 thou. I...
Liked On: 07-10-2023, 08:42 PM
234741
Liked On: 07-10-2023, 07:26 AM
Shelving brackets are a classic. At my local M10 I always grab a square off the rack and go thru the brackets. Usually will check around 10 to get 2 goodies.
Liked On: 07-10-2023, 06:52 AM
Champion NZ axeman.
Liked On: 06-10-2023, 08:57 PM
234741
Liked On: 06-10-2023, 06:37 PM
Champion NZ axeman.
Liked On: 06-10-2023, 05:29 PM
Champion NZ axeman.
Liked On: 06-10-2023, 05:09 PM
Whilst I'm sure that someone will post their recent replacement of a bent scope story, in the last few years Leupold have become less generous with free replacements if an optic has obviously been...
Liked On: 06-10-2023, 03:37 PM
Here's the SAAMI specs so the new primer shown is within spec. I'll do some measurements for comparison later today. CCI I have found have a wide range of thickness with BR primers out to 127 thou. I...
Liked On: 06-10-2023, 10:33 AM
Champion NZ axeman.
Liked On: 06-10-2023, 07:31 AM