https://uploads.tapatalk-cdn.com/202...a043f9216f.jpg
Sent from my iPhone using Tapatalk
Printable View
https://uploads.tapatalk-cdn.com/202...a043f9216f.jpg
Sent from my iPhone using Tapatalk
Did we shame you into giving it a clean?
fuck thats nice how much maybe i should upgrade. :ORLY:
How do the cheaper plasma cutters work?~$1000
Here you go @viper. Not the target species this morning but meat for the table nonetheless.
Attachment 148903
Took two of six seen (upper King Country DOC reserve).
Picked up a one of a kind bushcraft knife today. I really like how it's turned out.https://uploads.tapatalk-cdn.com/202...1cbd5041b2.jpghttps://uploads.tapatalk-cdn.com/202...ba108917a1.jpghttps://uploads.tapatalk-cdn.com/202...0a3bf8314b.jpghttps://uploads.tapatalk-cdn.com/202...3df3ada078.jpg
Sent from my SM-G975F using Tapatalk
Last of the Krait's made and sent to another forum member. First one with timber handles though as all the others have been Micarta.
14c28n , carbon pins, black and burnt orange liners.Attachment 150003
Convex at 18 degrees polished edge to 4000...
Attachment 150803
Attachment 150843
Boomslang model hunter for client's 50th present. Gidgee handles with toxic yellow and black G10 liners and fat carbon pins.
Hopefully off for a Otago spring deer hunt and will get bloodied.
Two more interesting builds currently underway.........stay tuned.:D
Hi @viper
Do you have a website where i can look at all the models?
-Inder
My newest "do-it-all" knife.
Attachment 151050
Comfortable, your whole hand can fit on the wood, or you can put your index finger in the hole which I would say would be more comfortable if you had a large hand. Its well balanced and a nice weight for chopping as well as cutting. The whole knife is only about 275mm (bit over 10 1/2 inches). The actual blade is about 5 inches. And it comes with a leather sheath.
Very cool!
Attachment 151184
i have one very similar shape
Attachment 151187
Something a bit different , Copperhead model but in old school cool 1080 high carbon steel. Forced patina and stone washed.
Atomic Red burlap micarta from the states with red and black G10 liners and rocking the carbon pins.
The stone washing was interesting and a first, hand full of quartz gravel, tupperware container and wife's tumble dryer once she was out of the house.
Had I being caught the knife would have probably been used on me.:D
Attachment 151188
Labour designed knife
Hi @viper,
That looks interesting, what is the size of blade and handle on that?
-Inder
4.5 inch blade, 5 inch handle
Hunting knife made for my hunting buddy, made from 1070 carbon steel, scales are made from 30 year old stabilized apple wood, brass pins, green G10 liner, lanyard brass made from 223 cartridge :)
Attachment 151303
Attachment 151305
Attachment 151312
Stumbled on this yesterday. I thought at 18min I'd be skipping through bits of it but it was kind of mesmerizing and before I knew it, I'd watched the whole thing.
https://youtu.be/12PgGoT6JeQ
not sure how that happened
spiderco bombshell, better made than my other spidercp's but Im worried the grip may be to short- time will tell
Beautiful timber, I like your style!
Just finished this small hunting knife.
1075 carbon steel, handle is made from wife's old fruit bowl (stabilized it), brass pins, black G10 liner and old .223 cartridge used for lanyard hole.
Attachment 152007
Attachment 152008
Here’s one from the past - a Gerber ‘Big Hunter’ model from the early 1960s. Carbon steel blade, cast-on aluminium handle, and the whole thing spayed with molten stainless steel.
It wasn’t easy to buy a decent knife in N Z in those days - most shops seemed to offer only Solingen, Green River, and cheap, often anonymous makes. I tried various models and wasn’t too impressed with any of them. If you knew somebody in the meat trade you might, with a lot of difficulty, be able to wrangle Victorinox knives, which were great, but you couldn’t buy them over the counter.
I obtained this Gerber in Australia, and have used it ever since. The handle isn’t as slippery as might be expected, even when wet and bloody, but I used to wrap it with cloth-backed friction tape if I was expecting to encounter sub-zero temperatures, to make sure my skin didn’t stick to it!
Attachment 152486
Tanto Style knife from a file, really fun to make these things from old stuff lying around the garage ....
Attachment 152533
Attachment 152534
Scabbard just needs more sanding and then oiling
On our never ending journey for better and better equipment performance (often born out of clever marketing) we tend to move further and further away from the foundations that forged todays norms, and we spend exorbitant money chasing some elusive 'element' that we feel incomplete without, only to feel disappointed and betrayed when we find that the gap between what we had and what we were chasing wasn't actually as big as we were lead to believe .............. and, that what we had in the first place, was actually pretty darn good, and that we often have to give up more than we actually gained in order to achieve our narrowly focused goal. (I think I need a beer now).
A case in point - knife steel. We all want that one knife that does it all, from filleting a fish to skinning a deer, from peeling an apple to battening some kindling, small enough to fit in your pocket but still big enough to stick a pig through the heart, that never goes rusty, and never needs sharpening.
In our pursuit of this phantom knife, knife steels have progressed from good old plain carbon to the latest and greatest (and expensive) high alloy super steels - tougher, stronger and shiner than ever before!
Being a keen knife user, I have my fair share of expensive hyper performance cutting implements (tools not toys), all bought with a focus on something I thought I might be missing out on.
But recently, having dabbled in the field of home made knife making, and not having the skills or experience or equipment to attempt to sculpt a blade from anything other than plain Jane high carbon steel (1075 and 1084), I have discovered that I have actually been missing out!!
I have never personally owned a plain carbon steel knife before I made one. In my naivety I saw my dad's plain carbon skinning and boning knives as nothing but high maintenance.
But that's all changed.
The first knife I ever made was made as a Christmas present for my brother.
The second was an experiment in making my first knife with a hidden tang handle. When I did the design and made the knife I was anticipating hanging the thing on the wall. It was deliberately big, with a bowie type blade that I thought would be impractical and not something that I would typically take hunting. Once finished, and since it was custom shaped to fit my hand, I decided to 'abuse' it by using it to cut open animal joints and split briskets in an effort to punish the steel and see how good my heat treat was, and to save my expensive super steel blades from having to endure these tasks (hang on a minute, isn't that why you justified buying these expensive blades in the first place - because they would handle the abuse that others wouldn't??).
This blade has blown all of my expectations completely out of the water over the past 18 months. It has been used to do all the tasks that I am too scared to use my expensive blades for, and not skipped a beat. Its never chipped, bent, buckled or snapped. The original edge is still intact, and yea, it needs a tickle up on the stone and strop a bit more than my 3V blades, but none of my 3V's have ever done the work that my ??? (just realised, my blade needs a name ....) has been put through.
And, the biggest surprise of all to me, is that the 'as heat treated' finish of the blade is actually really corrosion resistant! A wash in hot soapy water, towel dried, and then left to air out of its sheath. I don't even oil it!
My home made ?(insert name here)? blade is now my go to knife for processing deer, and its made out of the very non-super high carbon 1075 steel - go figure .........
So, to all who are chasing super steel performance, whilst the advantages of super steels over plain carbon steels are proven, in the practical world the difference from a properly heat treated plain carbon steel is smaller than you might think.
To all of you out there that have never had a go at making a knife, have a crack! If you correctly follow the basic principles of a good heat treat using plain carbon steel you might be surprised by what you end up with. It might be your new best hunting buddy.
PS. well done to all those who have had a crack and have posted their results in this thread - keep it up!
Attachment 152550
nicely written and right to the heart of the matter most steels are great WITH A PROPER HEAT TREAT .