2213sc, 59.5grs, 2970fps mv, 3/4inch at 100m. Rifles a Tikka t3x. 2213sc was the most accurate and produced the best velocities compared to 2209.
Liked On: 07-03-2022, 09:34 PM
So its been awhile since I've ventured into the lovely Kaimai supplejack bush that I learned to love and hate back in 2013. Family additions, the desire to chase Sika over reds, becoming a manager,...
Liked On: 07-03-2022, 09:29 PM
On a similar note. Yesterday I was in my cabin/office at home sorting out hunting gear for a trip this weekend, two rifles out as I'd put a few rounds through them earlier in the day. Looked out the...
Liked On: 07-03-2022, 09:07 PM
Pain in arse to get anything like that into NZ and I can make a liner out of any donor barrel long enough The 1:14" brand new light sporter barrel was given to me for this The 1885 is now...
Liked On: 07-03-2022, 09:04 PM
Once I get some suitable ammo on hand I will accurately measure the chamber reamer It's a modern Clymer reamer and expect a snug fit I imagine some of the old ones were pretty sloppy in the...
Liked On: 07-03-2022, 09:04 PM
converting your .223 is easy and cheap . . selling it later just got very hard.
Liked On: 07-03-2022, 09:03 PM
Interarms Mark X is a Zastava M70 in disguise (http://pdf.textfiles.com/manuals/FIREARMS/interarms_mkx.pdf), if that helps. Screws and threads should be interchangeable, but I'm not a gunsmith! Good...
Liked On: 07-03-2022, 08:58 PM
Got one here you can have free but its a bit rough
Liked On: 07-03-2022, 08:57 PM
Greetings All, Pommy I agree that it is dangerous to copy loads from the internet or even data form old load data manuals some of which was never pressure tested but Jukes request was for guidance...
Liked On: 07-03-2022, 08:51 PM
Thank you very much team! Appreciate the insight and recommendations. Time to get in to it! :thumbsup: sorry for the delay - forgot my forum password :x_x:
Liked On: 07-03-2022, 08:50 PM
I have some 308 Sub-X handloads but haven't put one in an animal yet. But I had noticed that they seem to make smaller holes in paper and trees than my subs with Robert's 151gr cast bullets. My...
Liked On: 07-03-2022, 08:45 PM
I believe these would be the proven answer to your subsonic performance woes however they are spendy 191889
Liked On: 07-03-2022, 08:45 PM
I'm well versed in this discussion :D The whole point of the Sub-X rounds is that they are supposed to expand at subsonic speeds. They don't most of the time. Almost everything from 22LR upwards will...
Liked On: 07-03-2022, 08:45 PM
We use the FTX supers in supersonic in three calibres -357 , 7.62x39, and the dino gun . They certainly do a number but the smaller rounds do not seem to penetrate very deep if they hit something...
Liked On: 07-03-2022, 08:45 PM
I've made a few posts about this subsonic ammo before, mainly it's ineffectiveness in killing animals due to lack of projectile expansion. Anyway, I finally got around to putting some supersonics in...
Liked On: 07-03-2022, 08:44 PM