Thread: Gun Porn, show off your new toys

@Gibo Ha ha

My light weight varmint rig
Shorten Sako 85 with carbon stock
Leupold vx3 4.5-14 and S&L suppressor
Splitting bunnies in half with 50 gr zmaxs and h380




Sent from my iPhone using Tapatalk

Schultz & Larsen 6.5x55 - Delta Titanium HD 4 24x50 SFP
Think I need lower rings - comes up nice standing - but prob not if on bi pod mat rest
Need some bullets now and a range longer than my 50m sight in under the Pines
The bolt on this is like ice over ice

[QUOTE=Sarvo;1067924]Schultz & Larsen 6.5x55 - Delta Titanium HD 4 24x50 SFP
Think I need lower rings - comes up nice standing - but prob not if on bi pod mat rest
Need some bullets now and a range longer than my 50m sight in under the Pines
The bolt on this is like ice over ice
@Sarvo I own 3 x S&L rifles ( Legacy, Victory and a Classic) and consider them as smooth an action as a couple of Sauer 90’s I have. Full diameter bolt is as smooth as you can get. Everything is high grade machined Steel, beautiful blueing and decent magazines. For the money and the quality, you get a superb switch barrel rifle with cut rifling. I have them in 6.5x55, 25.06, 22.250 and .223. Let us know how it shoots. Here’s some pic’s of the S&L factory I went through a couple of years ago.

@Southcity
That would have been a great visit
Norway yes ??
You might have seen my Thread on mounts out of Germany
I want to find the S&S mounts as people can see on your pic above they have a unique base receive
Appears to be no S&S in Era-Tac manufacturer Germany
Would you know where I could look
I 1st thought that was your home pic as I thought you were a rifle connoisseur - had me worried for a min :-)

Originally Posted by Sarvo

@Southcity
That would have been a great visit
Norway yes ??
You might have seen my Thread on mounts out of Germany
I want to find the S&S mounts as people can see on your pic above they have a unique base receive
Appears to be no S&S in Era-Tac manufacturer Germany
Would you know where I could look
I 1st thought that was your home pic as I thought you were a rifle connoisseur - had me worried for a min :-)

My S&L came with their 'scope mounts.

Originally Posted by Sarvo

@Southcity
That would have been a great visit
Norway yes ??
You might have seen my Thread on mounts out of Germany
I want to find the S&S mounts as people can see on your pic above they have a unique base receive
Appears to be no S&S in Era-Tac manufacturer Germany
Would you know where I could look
I 1st thought that was your home pic as I thought you were a rifle connoisseur - had me worried for a min :-)

@Sarvo I am not sure I completely follow your question. S&L make a custom base and ring to fit the double groove machined into the receiver. It is designed so you can have a winter and summer fitting for the scope ( assuming in the winter you wear more clothes and thus the length of pull differs). These mounts are imported along with S&L rifles by wholesalers CR Pain.
I have used as you have Weaver style bases to accomodate Burris Signature Zee Rings. ( the bases are drilled and tapped for bases as well.) This allows for various scope mount heights.

Originally Posted by Southcity

@Sarvo I am not sure I completely follow your question. S&L make a custom base and ring to fit the double groove machined into the receiver. It is designed so you can have a winter and summer fitting for the scope ( assuming in the winter you wear more clothes and thus the length of pull differs). These mounts are imported along with S&L rifles by wholesalers CR Pain.
I have used as you have Weaver style bases to accomodate Burris Signature Zee Rings. ( the bases are drilled and tapped for bases as well.) This allows for various scope mount heights.

Yes I understand the winter/summer movement
So it is only available from S&L - I thought maybe Era-Tac or the likes may have had a clone
I will get some lower rings and yes seat it onto the Weaver bases - I wont need to shift because or dress standards like the Europeans :-)

Originally Posted by Southcity

@Sarvo I am not sure I completely follow your question. S&L make a custom base and ring to fit the double groove machined into the receiver. It is designed so you can have a winter and summer fitting for the scope ( assuming in the winter you wear more clothes and thus the length of pull differs). These mounts are imported along with S&L rifles by wholesalers CR Pain.
I have used as you have Weaver style bases to accomodate Burris Signature Zee Rings. ( the bases are drilled and tapped for bases as well.) This allows for various scope mount heights.

Exactly. And Sarvo's 'scope is 30mm so in any event the supplied rings (being 1") would not have fitted.

Originally Posted by Tahr

Exactly. And Sarvo's 'scope is 30mm so in any event the supplied rings (being 1") would not have fitted.

@Tech - If I’m not mistaken the S&L rings come in 1” and 30mm?

Originally Posted by Southcity

@Tech - If I’m not mistaken the S&L rings come in 1” and 30mm?

Yeah, sorry. I meant my rifle came supplied with the 1' rings.

Originally Posted by Sarvo

@Southcity
That would have been a great visit
Norway yes ??
You might have seen my Thread on mounts out of Germany
I want to find the S&S mounts as people can see on your pic above they have a unique base receive
Appears to be no S&S in Era-Tac manufacturer Germany
Would you know where I could look
I 1st thought that was your home pic as I thought you were a rifle connoisseur - had me worried for a min :-)

S&L are Danish
Try a Danish gunshop?
https://huntershouse.dk/

Is who people use in Denmark if they are looking for a Bargain.

Originally Posted by norsk

S&L are Danish
Try a Danish gunshop?
https://huntershouse.dk/

Is who people use in Denmark if they are looking for a Bargain.

Hunters House is a very special gunshop. I have been to it a couple of times. Small looking shop but I believe he has 10,000 guns for sale. Actually bought a laminate stock for my S&L Classic there last time.

Schultz and Larsen now make the Slide and Lock rings in four sizes, 1", 30mm, 34mm and 36mm. The 1" are available in low, medium, medium high, high and extra high. 30mm rings available in the same heights except no extra high. The 34 and 36mm rings come in medium and medium high only.

Yep. I bought a set of S&L 30mm a few weeks ago. Theyre very good.